<p>After making the reflow oven, I wanted to make the oven more universal. An oven can e a help tool for heating, curing and drying. </p>



<p>The first setup just had one program that could be adjusted within limits. The controller had a temperature profile programmed into it and the user could change the temperature and the duration time at that temperature. Each setting had limits. Once the settings are saved, the user would need to change the settings again for a different function.</p>



<p>The new Controller can almost be programmed to do any type of heating between the room temperature and 250 degrees Celsius.  It can be easily programmed/changed using G-code on an SD card, each file is a different programmed oven function.  this allows the oven to almost do any temperature profile.</p>



<h2>Using the oven</h2>



<p>Using the oven is very simple, ensure the SD is inserted and has the correct program file required for the temperature profile. Power the oven controller and using the up/down buttons, navigate to the correct file and press enter(middle button). the oven will now start running that programmed temperature profile.</p>

Tinkers Projects

Tag: reflow

Programable Reflow Oven