Tinkers Projects - 3D Printer 3 Phase Motor Controller

3D Printer 3 Phase Motor Controller

Categories: Projects

3D Printer 3 Phase Motor Controller

Categories: Projects

I have a large amount of spare 3 phase motors after taking apart a few robots that were given to me and no way of diving them. I had a few ideas about how to drive them and have been playing with the different ideas to see what's the best way for control and performance. This motor driver is one of the ideas that I have had to drive the motors as a standard 3D printer motor controller. The Controller is a DRV11873P, it uses PWM to control the speed and digital pin to change direction for the motor. The PWM input is on the STEP input of the controller and the direction is the DIR input.

Latest projects

PCB Rover Robot WiFi

This is the second version of this little robot. I redesign. It to have an ESP8266 so it can be controlled over WiFi. The robot mostly surface mount components, most were are new parts. ...

SPRIED

For the past year, I have been working towards many different projects, all accessable and open for anyone to use. It has taken a lot of time and effort to get to a point of starting to...

10 Channel Temperature Logger

I challenged myself to make a fully working and functioning 10 channel temperature logger as fast as I could. It took me 5 hours to create the circuit and PCB. During this time I added...

Blackening/Blueing of steel parts

After doing a lot of different tests with electroplating, I wanted to try other ways of protecting steel from rusting. One of the easiest ways is called Blueing. it may be the easiest but it...

Popular projects

Coil Winding Machine

I'm will be making a new machine soon that will be able to do more with a better control system. Please send me a message here https://tinkersprojects.com/contact-me/ if you would like to...

Novation Launchpad Mini Repair

I got this Novation Launchpad Mini on eBay a while ago and have just got around to getting it apart to see whats wrong. The item was marked as not working so I messaged the seller to find out what...

PLEX Controller

PLEX is a development board using the Arduino UNO bootloader to be easily programmed by the Arduino IDE. The board has many selectable analog inputs and digital output (up to 32, not including...

LCD-Simple-Menu Library

This is a simple LCD Menu Library for Arduino to make menus to control robots and machines. Menu Systems on an LCD has always been a thing that has gotten in the way of developing...